Go To Search
Click to Home
Site Tools
Water Tightness
Tank Requirements
Features of the new ordinance to address water tightness are:
  • All tank lids shall be manufactured with risers pre-cast into the top of the tank
  • Boots for all tanks must meet ASTM C-923
  • Boots for concrete tanks must meet ASTM C-923 and have a clamp assembly to resist pipe deformation
  • Manufacturers shall install watertight boots at all penetrations
  • Risers shall terminate a maximum of 6 inches below finished grade

Contact Information
Additional information can be obtained by contacting Jerry Franklin at 703-771-5802 or .

Loudoun On
Site Tools